Engine - 998 tuning, further options

Terminology:
MSC/MM - Mini Spares Centre/Mini Mania
BBU - Big Bore Unit (refers to all 1275cc-based units)
SBU - Small Bore Unit (refers to all sub-1275cc units, here the 998)
BHP - Brake Horse Power
CR - Compression Ratio

To improve engine out-put, you need to increase the engine's 'breathing' ability. The stage one kit deals with all the easily bolted-on external parts, and represents the best increase for investment. From here on in the power increases will cost commensurately more money. Power production of any engine, once the 'breathing apparatus' (induction/exhaust system) has been dealt with to cause no restriction ...

Engine - Small-bore engine, 12G940 head fitting

They all have the same problems - generally requiring exhaust valve relief cut-outs machined into the block and re-alignment of the front water gallery transfer ports. However, I would avoid using heads with valves bigger than 35.7mm on the intake since these are too big for most 998 engines unless they are absolutely full-race spec where top end power at high rpm is all that is required.

First of all it is worth checking that you actually need to make the relief cut-outs since some heads have a big enough head face to exhaust valve face clearance to allow fitment without the cut-outs when the standard cam and rocker gear is retained.

If possible, measure the actual valve lift you are getting with the current fitted set-up.

Rally Isle of Man 11th to 13th September

Cylinder head 2022